IN THE NEWS
Jar Test found correct Wastewater Polymer to improve treatment
Wastewater Polymer jar testing is fun. Sometimes it is really fun, other times it makes you want to pull you hair out. Food Processor Wastewater Polymer Case Study We recently had been asked to re-test wastewater polymer for a prospective client. Most small industrial...
Polymer Selection Saves in Wastewater Treatment – A Jar Test Case Study
In my job, I see a lot of different plants and equipment. I see equipment that is well maintained, running well and I also see equipment that isn’t. What I see too often though is equipment being used with the wrong polymer and/or the wrong dosage. Your treatment...
In the United States, what safety shower and eyewash standards does OSHA enforce?
In the United Sates, The Occupational Safety and Health Administration is responsible to enforce workplace health and safety regulations. With regard to safety showers and eyewash standards, the actual OSHA code found in 29 CFR 1910.151(c)reads, "where the eyes or...
What ANSI Standards for eyewashes do I need to meet?
The ANSI standards for eyewashes can be found in ANSI Z358.1 2009 Revision. In the United States, OSHA refers to these important standards when reviewing safety shower compliance. Many other governments, around the world, do the same. Below you will find a short list...
What ANSI Standards for safety showers do I need to meet?
The ANSI standards for safety showers can be found in ANSI Z358.1 2009 Revision. In the United States, OSHA refers to these important standards when reviewing safety shower compliance. Many other governments, around the world, do the same. Below you will find a short...
What is the best emergency shower?
For those who regularly work in jobs that include possible exposure to corrosive chemicals and whose well-being could depend upon the right choice of emergency shower, a closer look at what an effective emergency shower should do is warranted. There are many emergency...
Are your safety showers certified by a major testing laboratory?
Yes. We have several models of safety showers that have been certified by CSA International. While some safety shower companies use UL and CSA somewhat loosely, they are often referring to a component or two on their showers being UL-listed or CSA-Certified. Or, they...
Do you have a safety shower for Class 1 Division 2 Hazardous Areas?
Many Class 1 Division 2 Hazardous area work sites make use of dangerous and corrosive chemicals in their work processes. The important factor in the designation of a Class 1 Division 2-compatible safety shower is to ensure that all electrical components are rated for...
Why do I need tepid water in my safety shower?
This is a good question that is becoming more and more frequent. Prior to 2009, the ANSI standard covering requirements for safety showers did not specify water temperature requirements. In the 2009 revision of ANSI Z358.1, two key standards were added to those...
Mini-Bulk supply of corrosive chemicals gaining traction in market, so why is this ?
We've had comments and requests from several customers over recent months about Mini-Bulk benefits when it comes to storing corrosive chemicals such as caustic soda and various acids. At first we thought this was a passing fad, but further investigation shows some...